Part A: Activator | Part B: Base
Duraflex pool epoxy
Polyamide Based
Polyamide Submersible Coating
Duraflex Pool Epoxy is polyamide based, 2 component, high industrial epoxy system suitable for coating concrete swimming pools / submersible applications in heavy duty environments. Ease of use is the key feature and NO ADDITIONAL PRIMERS ARE REQUIRED.
features
Features & Benefits
Convenient 1:1 mixing ratio • Moderate curing timetable • Superior resistance to abrasion • Excellent mechanical & dynamic properties • No primer required • Direct To Substrate (DTS) • Non-toxic when cured • Resistance to acids and alkalis • Easily applied by conventional methods • Aquatic friendly after 7 days full curing time.
features
Features & Benefits
Convenient 1:1 mixing ratio • Moderate curing timetable • Superior resistance to abrasion • Excellent mechanical & dynamic properties • No primer required • Direct To Substrate (DTS) • Non-toxic when cured • Resistance to acids and alkalis • Easily applied by conventional methods • Aquatic friendly after 7 days full curing time.
application
Application Method
Marbelite Pools • Fibreglass Pools • Concrete Dams • Fish Ponds
Duraflex Pool Epoxy can be applied by roller or brush. Care must be taken to use quality brushware for a good finish. The primer coat should be applied liberally, but do not cause “pooling”. Always apply Duraflex Pool Epoxy in a uniform direction and the area can be “blended” by re-rolling over the area with the roller, without adding or dipping the roller into the container. This will ensure even distribution of Duraflex Pool Epoxy. Allow proper curing times before applying the second coat, which is at least 8 hours.
mixing
Mixing Procedure
The Duraflex Pool Epoxy kit is supplied in equal quantities of Activator (A) and Base (B). The Activator is a semi clear/opaque fluid and the Base is the desired coloured fluid. Only mix the quantity required by adding equal parts of Activator and Base into a clean container. Stir intermittently for 30 minutes until a uniform structure is achieved. The coating is ONLY THEN READY FOR USE. Colours: White, Sky Blue, Medium Blue, Dark Blue, Charcoal and Black
more detail
Instructions, Coverage & Limitations
Instructions for Use: Substrates should at all times be free from oils, latencies, damp and foreign materials, including existing, incompatible coatings. Surface preparation may include several options and its advisable to consult our Duraflex Pool Epoxy technical data sheet. Coverage: Duraflex Pool Epoxy is specified at 200 µm. (3sqm per/lt for a 2 coat system). 6sqm per litre on the primer coat • 6sqm per litre on the secondary coat. Limitaions: Duraflex Pool Epoxy can be applied at substrate temperatures between 15°C-35°C at a relative humidity of 50%. Pot Life: 4 Hours @ 25°C.
application
Application Method
Marbelite Pools • Fibreglass Pools • Concrete Dams • Fish Ponds
Duraflex Pool Epoxy can be applied by roller or brush. Care must be taken to use quality brushware for a good finish. The primer coat should be applied liberally, but do not cause “pooling”. Always apply Duraflex Pool Epoxy in a uniform direction and the area can be “blended” by re-rolling over the area with the roller, without adding or dipping the roller into the container. This will ensure even distribution of Duraflex Pool Epoxy. Allow proper curing times before applying the second coat, which is at least 8 hours.
mixing
Mixing Procedure
The Duraflex Pool Epoxy kit is supplied in equal quantities of Activator (A) and Base (B). The Activator is a semi clear/opaque fluid and the Base is the desired coloured fluid. Only mix the quantity required by adding equal parts of Activator and Base into a clean container. Stir intermittently for 30 minutes until a uniform structure is achieved. The coating is ONLY THEN READY FOR USE. Colours: White, Sky Blue, Medium Blue, Dark Blue, Charcoal and Black
more detail
Instructions, Coverage & Limitations
Instructions for Use: Substrates should at all times be free from oils, latencies, damp and foreign materials, including existing, incompatible coatings. Surface preparation may include several options and its advisable to consult our Duraflex Pool Epoxy technical data sheet. Coverage: Duraflex Pool Epoxy is specified at 200 µm. (3sqm per/lt for a 2 coat system). 6sqm per litre on the primer coat • 6sqm per litre on the secondary coat. Limitaions: Duraflex Pool Epoxy can be applied at substrate temperatures between 15°C-35°C at a relative humidity of 50%. Pot Life: 4 Hours @ 25°C.