Water Based Metal Primer
Duraflex
Red oxide
Top Coat Metal Primer
excellent adhesion
DURAFLEX Red Oxide is a water-based metal primer suitable for mild steel and galvanized iron surfaces. It benefits excellent adhesion and low VOC. It is a sound surface for top coats and has excellent rust inhibiting power.
preparation
Surface Preparation
New Surfaces: Surface/s must be thoroughly clean, dry and in sound condition before commencing work. Galvanised Iron: Clean and remove all oil/grease prior to applying one coat of Duraflex Red Oxide Water Based Metal Primer. Apply two topcoats of paint in the desired finish. Iron & Steel: Clean and remove all oil/grease prior to using this product. Apply one coat of Duraflex Red Oxide Water Based Metal Primer, followed by two topcoats of paint in the desired finish.
preparation
Surface Preparation
New Surfaces: Surface/s must be thoroughly clean, dry and in sound condition before commencing work. Galvanised Iron: Clean and remove all oil/grease prior to applying one coat of Duraflex Red Oxide Water Based Metal Primer. Apply two topcoats of paint in the desired finish. Iron & Steel: Clean and remove all oil/grease prior to using this product. Apply one coat of Duraflex Red Oxide Water Based Metal Primer, followed by two topcoats of paint in the desired finish.
application
Duraflex Red Oxide Application
Brush, (Short Nap) Roller or Airless Spray • Stir the contents thoroughly before use • This product can be thinned down for spray application max dilution 5% with water • Allow +/- 4 hours drying time before applying the final coat/s of paint • Clean tools with water.
Extra Advice
Important Things to Know
Drying Time: Touch Dry: 30 Min • Hard Dry: 4 Hours • Recoating Time: 4 Hours. Spread Rate: 7-9 m2 per litre. Precautions: Do not apply if rain is imminent. • Apply at an ambient temperature of 5 to 35°C. • Keep out of reach of children. • Wash hands with water immediately after use. • Skin or eye contact: clean with fresh water and consult a physician if necessary. Wear protective clothing such as overalls, gloves and eyewear.
application
Duraflex Red Oxide Application
Brush, (Short Nap) Roller or Airless Spray • Stir the contents thoroughly before use • This product can be thinned down for spray application max dilution 5% with water • Allow +/- 4 hours drying time before applying the final coat/s of paint • Clean tools with water.
Extra Advice
Important Things to Know
Drying Time: Touch Dry: 30 Min • Hard Dry: 4 Hours • Recoating Time: 4 Hours. Spread Rate: 7-9 m2 per litre. Precautions: Do not apply if rain is imminent. • Apply at an ambient temperature of 5 to 35°C. • Keep out of reach of children. • Wash hands with water immediately after use. • Skin or eye contact: clean with fresh water and consult a physician if necessary. Wear protective clothing such as overalls, gloves and eyewear.